Volvo 740 GL Spezifikationen PDF herunterladen (Seite 97)

1986 Volvo 740 GL, GLE, Turbo

a. thin (ML), for seams under the car.

b. thin (transparent) for visible pans.

c. thick, for parts on the underbody and wheel housing which experience most wear.

Parts of the car which may need to be touched up (and the recommended rustproofing compound) are:

● visible welded seams and panel seams-(type b)

● underbody and wheel housings-(type c)

● hood-(type b)

● door hinges-(type b)

● hood hinges and locks-(type b).

After completion of all work on the vehicle, remove excess rustproofing compound with a cloth soaked

in kerosene.

The sheet metal surfaces of the engine compartment are protected by a transparent wax-based

rustproofing compound. The compound withstands normal washings without deterioration.

Mineral based solvents will, however, dissolve the compound, especially so if they contain emulgators.

In such cases the wax protection should be renewed.

pg. 86 Paint touch-up

Paint touch-up

Paint damage requires immediate attention to avoid rusting. Make a habit of checking the finish

regularly; when washing the car for instance. Touch up if necessary.

Paint repairs require special equipment and skill. Contact your Volvo dealer for any extensive damages.

Minor scratches can be repaired by using Volvo touch-up paint.

NOTE: When ordering touch-up paint from your Volvo dealer, use the paint code indicated on the

file:///K|/ownersdocs/1986/1986_740/86740_06.htm (3 of 9)12/30/2006 7:51:34 AM

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 140 141

Keine Kommentare

Volvo 740 GL Spezifikationen Seite 97