Volvo D12 Spezifikationen PDF herunterladen (Seite 13)

Volvo Trucks North America, Inc. Date Group No. Page

TSI 8.2003 215 001 13(21)

•

Use the portion of the pointer that is fastened to the

tool shaft as a reference surface since this part is

protected from being bent (4).

Special tools: 9996956, J–41272, J–42773

Steam clean around the valve cover and the upper

front cover.

Disconnect the negative battery lead.

VN model only

Drain coolant and then remove the top right fan ring

support and the top radiator neck from the thermostat

housing.

All other models

Remove the fan ring support bracket, remove the fan belt

and then remove the fan, the fan hub and bracket as

one assembly. Relocate in the fan shroud area while

making sure not to damage the radiator.

Remove the intake pipe that spans from the air filter to

the turbo and then cover the turbo.

Remove the valve cover.

Remove the VEB and cam sensor harness connections

to the upper front cover.

Disconnect the internal wiring harness to the VEB

control solenoid.

Remove the upper front cover.

Slightly loosen the cam sensor wheel and note the

position of the wheel in relation to its mounting bolts, i.e.

clockwise against the mounting bolts, in the center, or

counter-clockwise against the mounting bolts.

Remove the cam sensor wheel.

Remove the inspection cover on the flywheel housing.

Install the engine turning tool 9996956.

9996956

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20 21

Keine Kommentare

Volvo D12 Spezifikationen Seite 13