130 Maintenance
Front Wheel Hubs
The front wheel hubs can be filled with one
of several types of oil. Motor oil should be
SAE 30 or 15W40. The oil can be either
petroleum based or synthetic (synthetic
should not be used for the Volvo axle). Axle
oil, API GL-5, SAE 75W-90, can also be
used.
There are no set change intervals for hub
lubrication. The only requirement is that
if the hub is opened, the lubricant must be
changed.
DANGER
Failure to keep wheel bearings properly
adjusted may result in accelerated tire
wear, poor handling and, in extreme cases,
wheel separation from the hub or from the
spindle resulting in loss of vehicle control
and serious personal injury or death.
W7001271
Kommentare zu diesen Handbüchern