Volvo TAD1345GE Betriebsanweisung PDF herunterladen (Seite 51)

Engine, General

General inspection

Make it a habit to give the engine and engine bay a

visual inspection before starting the engine and after

operation once the engine has stopped. This will help

you to discover quickly if anything abnormal has hap-

pened, or is about to happen.

Look especially carefully at oil, fuel and coolant leak-

age, loose bolts, worn or poorly tensioned drive belts,

loose connections, damaged hoses and electrical

cables. This inspection only takes a few minutes and

can prevent serious malfunctions and expensive

repairs.

WARNING!

Accumulations of fuel, oil and grease on the engine or

in the engine room is a fire hazard and must be

removed immediately they are detected.

WARNING!

If an oil, fuel or coolant leak is detected, the cause must

be investigated and the fault rectified before the engine

is started.

IMPORTANT!

Remember the following when washing with a power

washer: Never aim the water jet at radiators, charge air

cooler, seals, rubber hoses or electrical components.

Air Filter, Check and Change

The engine is equipped with electronic air filter indica-

tion.

The control unit provides an output signal which is

announced as a warning on the instrument panel. The

warning indicates a pressure drop in the air filter, which

must then be checked and possibly changed.

•

Scrap the old filter. No cleaning or re-use is permis-

sible

•

In continuous operation, the filter should be checked

every 8 hours. For operations in extremely dirty

environments such as coal mines and rock crushing

mills, special air filters must be used.

Maintenance

7748641 06-2010 47

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 81 82

Keine Kommentare

Volvo TAD1345GE Betriebsanweisung Seite 51