Volvo TAD1345GE Betriebsanweisung PDF herunterladen (Seite 62)

Coolant Filter, Change

NOTICE! Only applies to engines using Volvo Penta

Coolant (green). Engines using Volvo Penta Coolant

VCS are not fitted with coolant filters.

1 Turn the tap (1) 90° to stop the flow through the

coolant filter.

2 Remove the coolant filter with a suitable extractor.

Make sure that no residue from the old seal remains

in the housing.

3 Put a thin layer of engine oil on the new coolant filter

seal. Screw the coolant filter on by hand until the

seal comes into contact with the mating surface of

the filter bracket. Then tighten the coolant filter a

further 1/2 turn.

4 Turn the tap (1) 90° to release the flow through the

coolant filter again.

5 Start the engine and carry out a leakage check.

6 Switch the engine off and check the coolant level.

Refer to Coolant Level, Checking and Topping

Up page 56.

Open

Closed

Maintenance

58 7748641 06-2010

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 81 82

Keine Kommentare

Volvo TAD1345GE Betriebsanweisung Seite 62